Austenitic stainless steels processed by rolling are widespread in technological applications, since they have excellent mechanical and corrosion properties. This study investigated the effect of the cooling rate, microstructure and properties of 316L austenitic stainless steel under cold rolled conditions and by rapid solidification. The microstructure of the cold rolling processing steel was composed of austenite and a low percentage of delta ferrite. For the rapid solidification condition, the microstructure evolved from columnar and acicular dendrites to equiaxed dendrites with decreasing cooling rates, without the presence of delta ferrite due to the high cooling rate. Furthermore, thermal analyses in both routes revealed that oxidation kinetics was slower after rapid solidification in synthetic air. The microhardness in the cold rolling condition was lower than in the rapid solidification condition since the microstructure under the solidification condition is more refined. The sample in the rapid solidification condition region RS1 presented the highest corrosion resistance considering the pit potential. The passivation current density in the cold rolled condition was 5.72x10-5A/cm2, while under the rapid solidification condition, regions RS1 and RS2 were 2.24x10-5 A/cm2 and 3.72x10-6 A/cm2, respectively, and region RS3, did not present a passivation region in a broad range of potentials.

The objective of this work was the conformation of ribbons from Sn3Zn alloy and Sn pure, using the melt-spinning fast cooling technique, in order to investigate the applicability as biomaterial. The ribbons were coated with 1% poly-caprolactone (PCL) and subsequent incorporation of silver nanoparticles (NPAg). In the uncoated ribbon was observing a surface roughness due of agglomerate caused by rapid solidification. In the ribbon coated with PCL and NPAg incorporation, it was observed that these compounds adhered to the ribbon. X-ray diffraction analysis showed no ribbons amorphization. The analysis by differential scanning calorimetry, indicated that the Sn3Zn ribbon had a lower melting temperature (198.1°C) than the Sn ribbon (228.7°C). The microhardness of Sn3Zn ribbon was 13.38 HV and Sn ribbon was 11.00 HV, both for the face without contact with the cooling wheel. In the bioactivity assays, performed in simulated body fluid medium, all samples showed apatites formation after four weeks of testing.

With technological advances in the several areas of knowledge, the constant search for materials with characteristics that meet certain applications has been growing, especially in the chemical and petrochemical industries, where materials capable of withstanding the conditions of corrosion in aggressive environments are required. The aim of this paper was to analyze the influence of the alloy element molybdenum on the microstructure and the resistance to corrosion of two duplex stainless steels identified as A (with molybdenum) and B (without molybdenum), after solution-treated under the following conditions: heating at 1100ºC for 30, 120 and 240 minutes. The steels were characterized by SEM, EDS, DRX and microhardness. The rise in solution treatment time fostered an increase in the volumetric fraction of the ferrite phase, in both steels. The solution treatment at 1100ºC for 120 minutes, for steels A and B, provided good resistance to pit corrosion, as well as the development of a passivating film in the solution of lithium chloride (120,000 ppm of chloride ions).

Titanium is used in orthopedic and orthodontic implants because it has good corrosion resistance and excellent biocompatibility. Thus, studies seek to obtain a coating to improve the adhesion between the bone and the implant, by modifying the metal’s surface. The objective of this work was to biomimetically coat C.P. Ti with hydroxyapatite doped with silver nitrate, a component with antimicrobial properties, coating the metallic-ceramic composite with a polycaprolactone polymer film, which is known by generate improved implant-tissue interaction, and reducing postoperative complications from bacterial infections. The characterization of the material demonstrated the existence of the coating overall surface of the metallic substrate. The results obtained from the bacterial culture tests with Staphylococcus aureus showed that nitrate was effective in reducing the amount of live bacteria present in the supernatant, as well as those adhered to the surface of the material. In addition, the polymeric coating did not prevent the release of the bactericidal agent, not interfering in the effect there.

Heart diseases affect part of world population and generally involves the functioning of valves. Valves replacement is the most common treatment and the choice between synthetic or natural/biological implants depends on several factors. Synthetic implants have greater durability, whereas biological ones are more biocompatible. This work proposes the use of polymeric coating on titanium metal surface to increase implant biocompatibility. Poly-caprolactone (PCL) has demonstrated greater efficacy for biomedical applications due to its biocompatibility. It can easily form films and coat surfaces. Titanium discs were submitted to alkaline and thermal treatments and coated with 1%PCL and 1%PCL+TiO2. For both conditions, PCL crystals were found in titanium coated surface (SEM and EDX) and X-ray diffractogram confirmed PCL coating. Infrared Spectroscopy spectra showed both PCL and TiO2 characteristic peaks. Moreover, corrosion resistance of coated disc has considerably increased, proving the effectiveness of PCL as coating material and its potential application in cardiac valves.

The thermal treatments employed in alloys are essential to obtaining desired microstructures and corrosion resistance properties. In this paper the low carbon martensitic steel 13Cr4Ni0.2C with different tempering temperatures was studied using potentiodynamic polarization technique in synthetic marine environment, in order to evaluate the effect of the tempering temperature on the steel corrosion resistance in an environment that simulates the conditions of use in oil and gas production. Microscopy results showed differences in the microstructure of tempered steel at low (620°C) and high (770°C) temperatures, indicating the appearance and extending of martensite laths with increasing temperature. Polarization tests showed that tempering temperature located between 620°C and 710°C indicated passive film formation and tempering temperatures of around 620 °C showed better resistance values to pitting corrosion.

Biomaterials are effective alternatives for tissue substitution, including the bone tissue, since they do not pose risks of transmission of diseases or immune rejection. Nowadays, there is an interest in new materials capable of being associated with other substances which favor bone formation, especially natural biopolymers, in particular chitosan, which may present a potential for repairing bone defects and forms films that adhere to metal surfaces. Titanium, despite being a material greatly employed in implants because of its excellent physical properties, does not present bioactive characteristics, making it necessary to use methods of surface modification to enhance its biological response, favoring bone formation. This work aims at studying commercially pure titanium (cp-Ti) coating with chitosan using the biomimetic method and the evaluation of the effects of process variables as substrate surface conditions. Subsequently, the incorporation of AgNO3 was studied and its effects on corrosion resistance were evaluated. To evaluate the coating process, several tests were conducted, such as scanning electron microscopy, X-ray diffraction and infrared spectroscopy. From the results obtained, the efficacy of the chitosan film in inhibiting the corrosion of the metals is concluded, which was the target of this study, thus justifying its use for osseointegration and in several implants.

Ligas Ni-Cr-Mo são amplamente utilizadas como próteses dentárias fixas, sendo utilizados diferentes procedimentos de refundição que podem alterar as propriedades mecânicas e resistência à corrosão. O objetivo desse trabalho foi analisar o comportamento eletroquímico, as microestruturas e a dureza de duas ligas refundidas pelo processo de refundição em chama aberta (maçarico oxi-GLP) e por indução em forno de alta frequência. A análise metalográfica revelou estruturas dendríticas com grãos largos e precipitados nos seus contornos. As ligas refundidas por indução apresentam menor resistência à corrosão em soro fisiológico, a 37 ºC e maiores valores de dureza.

Ni-Cr-Mo alloys are widely used as fixed dental prostheses, and different procedures for remelting are used which can change the mechanical properties and corrosion resistance. The main aim of this study was to analyze the electrochemical behavior, microstructures and hardness of two remelted alloys by the open flame process (oxy-GLP torch) and by induction in high frequency furnace. Metallography analysis showed dendritic structures with large grains and precipitates in their contours. Alloys recast by induction displayed a lower corrosion resistance in physiologic serum, at 37 °C and higher hardness values.